Allied Telesis AT-S62 - Manual (Page 72)

Chapter 5: Simple Network Time Protocol (SNTP) Commands
72
SHOW SNTP
Syntax
show sntp
Parameters
None.
Description
This command displays the following information:
❑ Status of the SNTP client software
❑ SNTP server IP address
❑ UTC Offset
❑ Daylight Savings Time (DST) - enabled or disabled
❑ Poll interval
❑ Last Delta - The last adjustment that had to be applied to the
system time. It is the drift in the system clock between two
successive queries to the SNTP server.
Example
The following command displays SNTP client software information:
show sntp