Allied Telesis AT-S62 - Manual (Page 315)

AT-S62 Command Line User’s Guide
315
PURGE GARP
Syntax
purge garp=gvrp
Parameter
garp Specifies the GARP application you want to reset.
The only GARP application supported by AT-S62
management software is GVRP.
Note
The online help for this command contains an STP option. The
option is not supported.
Description
This command disables GVRP on the switch and returns the GVRP timers
values to their default settings. All GVRP-related statistics counters are
returned to zero.
Example
The following command disables GVRP and returns the timers to their
default values:
purge garp=gvrp