Allied Telesis AT-S62 - Manual (Page 122)

Chapter 7: SNMPv3 Commands
122
DESTROY SNMPv3 NOTIFY
Syntax
destroy snmpv3 notify=notify
Parameter
notify Specifies an SNMPv3 Notify Table entry.
Description
This command deletes an SNMPv3 Notify Table entry. After you delete
an SNMPv3 Notify Table entry, you cannot recover it.
Examples
The following command deletes an SNMPv3 Notify Table entry called
“systemtestnotifytrap.”
destroy snmpv3 notify=systemtestnotifytrap
The following command deletes an SNMPv3 Notify Table entry called
“engineeringinform1.”
destroy snmpv3 notify=engineeringinform1