Allied Telesis AT-S62 - Manual (Page 201)

AT-S62 Command Line User’s Guide
201
SHOW FILE
Syntax
show file=”filename”
Parameter
file Specifies the name of the file to be displayed. Use
double quotes to enclose the name if it contains
spaces. Otherwise, the quotes are optional.
Description
This command displays a list of the files in the switch’s file system. You
can use the wildcard “*” to replace any part of the filename to allow a
more selective display.
You can also use this command to display the contents of a
configuration file.
Examples
This command displays all the files in the switch’s file system:
show file=*.*
This command displays all the configuration files on the switch:
show file=*.cfg
This command displays the contents of the configuration file sw12.cfg:
show file=sw12.cfg