Allied Telesis AT-S62 - Manual (Page 292)

Chapter 21: MSTP Commands
292
no, off, false Disable migration check. The
values are equivalent.
Note
Each time a MSTP port is reset by receiving STP BPDUs, set the
migrationcheck parameter to yes, allowing the port to send MSTP
BPDUs.
Description
This command sets a port’s MSTP settings.
Examples
The following command sets the internal port cost to 1,000,000 and port
priority to 224 (increment 14) for Port 4:
set mstp port=4 intportcost=1000000
portpriority=14
The following command changes Ports 6 to 8 so they are not considered
edge ports:
set mstp port=6-8 edgeport=no
The following command returns Port 7 to the default MSTP settings:
set mstp port=7 default