Allied Telesis AT-S62 - Manual (Page 331)

AT-S62 Command Line User’s Guide
331
SHOW SWITCH PORT SECURITYMODE
Syntax
show switch port=port securitymode
Parameters
port Specifies the port whose security mode settings you
want to view. You can specify more than one port at
a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command displays the security mode settings for the ports on the
switch.
Example
This command displays the security mode settings for ports 1 to 5:
show switch port=1-5 securitymode