Allied Telesis AT-S62 - Manual (Page 163)

AT-S62 Command Line User’s Guide
163
The following command sets the speed to 100 Mbps, the duplex mode
to full duplex, the wiring configuration to MDI-X, and flow control to
enabled for ports 2 to 6:
set switch port=2-6 speed=100mfull mdimode=mdix
flowcontrol=enable
The following command sets port priority to 5 and activates the
broadcast filter for ports 5, 8, and 12:
set switch port=5,8,12 priority=5
bcastfiltering=enabled
The following command resets port 5:
set switch port=5 softreset