Set prompt – Allied Telesis AT-S62 User Manual

Page 26

Text mode
Original mode

Chapter 2: Basic Command Line Commands

SET PROMPT

Syntax

set prompt=”prompt”

Parameter

prompt

Specifies the command line prompt. The prompt can

be from one to 12 alphanumeric characters. Spaces
and special characters are allowed. The prompt must
be enclosed in double quotes.

Description

This command changes the command prompt. Assigning each switch a
different command prompt can make it easier for you to identify the
different switches in your network when you manage them.

Example

The following command changes the command prompt to “Sales
Switch”:

set prompt=”Sales Switch”