Allied Telesis AT-S62 - Manual (Page 49)

AT-S62 Command Line User’s Guide
49
Note
For a list of the default values, refer to Appendix A in the AT-S62
Management Software User’s Guide.
Note
The switch will not forward traffic during the reset process, which
takes 20 to 30 seconds. Some network traffic may be lost.
Your local or remote management session with the switch ends when
the unit is reset. You must reestablish the session to continue managing
the unit.
Example
The following command configures the switch using the configuration
file SWITCH12.CFG:
restart switch config=switch12.cfg
The following command resets the switch to its default values:
restart switch config=none