Allied Telesis AT-S62 User Manual
Page 221
AT-S62 Command Line User’s Guide
221
The log can display its entries in chronological order (oldest to newest),
or reverse chronological order. The default is chronological order. To
reverse the order, use the REVERSE parameter.
The SEVERITY parameter displays entries of a particular severity. Table 2
defines the different severity levels. You can specify more than one
severity level at a time. The default is error, warning, and informational.
SSH
Secure Shell protocol
SSL
Secure Sockets Layer protocol
STP
Spanning Tree, Rapid Spanning, and Multiple
Spanning Tree protocols
SYSTEM
Hardware status; Manager and Operator log in
and log off events.
TACACS
TACACS+ authentication protocol
Telnet
Telnet
TFTP
TFTP
Time
SNTP
VLAN
Port-based and tagged VLANs, and multiple
VLAN modes
Table 2 Event Log Severity Levels
Value
Severity Level
Description
E
Error
Switch operation is severely impaired.
W
Warning
An issue may require manager attention.
I
Informational
Useful information that can be ignored
during normal operation.
D
Debug
Messages intended for Technical Support
and Software Development.
Table 1 AT-S62 Modules
Module Name
Description