Allied Telesis AT-S62 - Manual (Page 38)

Chapter 4: Basic Switch Commands
38
DISABLE IP REMOTEASSIGN
Syntax
disable ip remoteassign
Parameters
None.
Description
This command deactivates the DHCP and BOOTP client software on the
switch. This command is equivalent to DISABLE DHCPBOOTP on page
37. The default setting for the client software is disabled.
To activate the DHCP and BOOTP client software, refer to ENABLE
DHCPBOOTP on page 40 or ENABLE IP REMOTEASSIGN on page 41.
Example
The following command deactivates the DHCP and BOOTP client
software:
disable ip remoteassign