Allied Telesis AT-S62 - Manual (Page 282)

Chapter 21: MSTP Commands
282
PURGE MSTP
Syntax
purge mstp
Parameters
None.
Description
This command returns all MSTP bridge and port parameters settings to
their default values. This command also deletes all multiple spanning
tree instances and VLAN associations.
In order for you to use this command, MSTP must be the active spanning
tree protocol on the switch and the protocol must be disabled. To select
MSTP as the active spanning tree protocol on the switch, see ACTIVATE
MSTP on page 275. To disable MSTP, refer to DISABLE MSTP on page 280.
Example
The following command resets the MSTP bridge and port parameter
settings:
purge mstp