Allied Telesis AT-S62 - Manual (Page 209)

AT-S62 Command Line User’s Guide
209
UPLOAD
Syntax
upload method=tftp|xmodem destfile=filename
server=ipaddress file=filename
Parameter s
method Specifies the method of the upload. The options are:
tftp Specifies a TFTP upload. To use
this option, there must be TFTP
server software on a network
node. You can use this option
from either a local or Telnet
management session.
xmodem Indicates that the upload will be
performed using Xmodem. This
option is supported only from a
local management session.
destfile Specifies a filename for the file when saved on the
TFTP server. If the name contains spaces, enclose the
name in quotes. This parameter is used with a TFTP
upload.
server Specifies the IP address of the network node
containing the TFTP server software. This parameter
is used with a TFTP upload.
file Specifies the name of the file you are uploading
from the switch. If the name contains spaces,
enclose the name in quotes. To upload the AT-S62
software image, the name must be ATS39.IMG.
Description
This command can upload any of the following types of files from a
switch to a management workstation or TFTP server:
❑ AT-S62 software image
❑ Configuration file
❑ Public key certificate
❑ Public key certificate enrollment request