Allied Telesis AT-S62 - Manual (Page 326)

Chapter 24: Port Security Commands
326
SET SWITCH PORT INTRUSIONACTION
Syntax
set switch port=port
intrusionaction=discard|trap|disable
Parameters
port Specifies the port where you want to change the
intrusion action. You can specify more than one port
at a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
intrusionaction Specifies the intrusion action. Options are:
discard Discards an invalid frame. This is the
default setting.
trap Discards an invalid frame and sends an
SNMP trap.
disable Discards an invalid frame, sends an
SNMP trap, and disables the port.
Description
This command changes the security intrusion action on a port that is
operating in the Limited security mode. Intrusion action determines
what a port will do when it receives an invalid frame.
Example
This command changes the intrusion action to trap on ports 12 and 21:
set switch port=12,21 intrusionaction=trap