Allied Telesis AT-S62 - Manual (Page 399)

AT-S62 Command Line User’s Guide
399
ENABLE AUTHENTICATION
Syntax
enable authentication
Parameters
None.
Description
Use this parameter to activate TACACS+ or RADIUS manager account
authentication on your switch. To select an authenticator protocol, refer
to SET AUTHENTICATION on page 401.
Note
If you are using the RADIUS authentication protocol for 802.1x port-
based access control, but not for manager account authentication,
you do not need to use this command. You can leave the RADIUS
manager account feature disabled. The switch will still have access
to the RADIUS configuration information for 802.1x port-based
access control.
Example
The following command activates manager account authentication on
your switch:
enable authentication