Delete vlan – Allied Telesis AT-S62 User Manual
Page 302
Chapter 22: VLANs and Multiple VLAN Commands
302
DELETE VLAN
Syntax 1
delete vlan=name [vid=vid] port=ports
frame=untagged|tagged
Syntax 2
delete vlan=name [vid=vid] taggedports=ports
untaggedports=ports
Parameters
vlan
Specifies the name of the VLAN to be modified.
vid
Specifies the VID of the VLAN to be modified. This
parameter is optional.
port
Specifies the ports to be removed from the VLAN.
This parameter must be used with the FRAME
parameter.
frame
Identifies the ports to be removed as tagged or
untagged. This parameter must be used with the
PORT parameter.
taggedports
Specifies the tagged ports to be removed from the
VLAN.
untaggedports
Specifies the untagged ports to be removed from
the VLAN.
Description
This command removes tagged and untagged ports from a port-based
or tagged VLAN.
This command has two syntaxes. You can use either command to delete
ports from a VLAN. The difference between the two is that Syntax 1 can
remove only one type of port, tagged or untagged, at a time from a
VLAN, while Syntax 2 can remove both in the same command. This is
illustrated in the Examples section below.
Note