Allied Telesis AT-S62 - Manual (Page 204)

Chapter 14: File Download and Upload Commands
204
srcfile Specifies the filename of the file you are
file downloading onto the switch. The filename is
required for a TFTP download. If the filename
contains a space, enclose the name in double
quotes. These parameters are equivalent.
switchlist Specifies the switches in an enhanced stack to which
to download the software image or file from the
master switch. To view the switches in an enhanced
stack, see SHOW REMOTELIST on page 34. This
parameter is used with the REMOTESWITCH
parameter.You can specify more than one switch at
a time (for example, 1,3,4). This option can only be
used from a local or remote management session of
a master switch.
verbose Specifies whether to display details of the download
operation. This option can only be used with the
REMOTESWITCH download method. The options
are:
yes, on, true Display the download details. These
values are equivalent.
no, off, false Do not display the download
details. These values are equivalent.
Description
You can use this command to download a new version of the AT-S62
management software onto a switch.
You can also use this command to download any of the following types
of files into a switch’s file system:
❑ Configuration file
❑ Public key certificate
❑ Public key certificate enrollment request
❑ Encryption key
This command can download files as follows:
❑ From a management workstation to a slave or master switch
using Xmodem or TFTP.
❑ From a master switch to other switches in an enhanced stack.