Set mstp msti – Allied Telesis AT-S62 User Manual
Page 287
AT-S62 Command Line User’s Guide
287
SET MSTP MSTI
Syntax
set mstp msti mstiid=mstiid priority=priority]
Parameters
mstiid
Specifies a MSTI ID. You can specify only one MSTI ID
at a time. The range is 1 to 15.
priority
Specifies the MSTI priority value for the switch. The
range is 0 to 61,440 in increments of 4,096. The range
is divided into sixteen increments, as shown in the
following table. You specify the increment that
represents the desired bridge priority value. The
default value is 32,768, which is increment 8.
Description
This command changes the MSTI priority value of a spanning tree
instance on a bridge. This value is used in determining the regional root
bridge of a spanning tree instance.
The MSTIID parameter specifies the MSTI ID whose MSTI priority you
want to change. The range is 1 to 15.
The PRIORITY parameter specifies the new MSTI priority value. The range
is 0 (zero) to 61,440 in increments of 4,096, with 0 being the highest
priority.
Table 13 MSTI Priority Value Increments
Increment
MSTI
Priority
Increment
MSTI
Priority
0
0
8
32,768
1
4,096
9
36,864
2
8,192
10
40,960
3
12,288
11
45,056
4
16,384
12
49,152
5
20,480
13
53,248
6
24,576
14
57,344
7
28,672
15
61,440