Samsung SGH-T989ZKBTMB - Manual (Page 230)

Activating Wi-Fi
By default, your device’s Wi-Fi feature is turned off
(deactivated). Activating Wi-Fi allows your device to discover
and connect to compatible in-range WAPs (Wireless Access
Points).
1. From the Home screen, press and then tap
Settings.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on. The slider color indicates the
activation status. The device scans for available in-
range wireless networks and displays them under Wi-
Fi networks on the same screen.
Connecting to a Wi-Fi Network
1. From the Home screen, press and then tap
Settings ➔ Wi-Fi.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks display in the Wi-Fi networks section.
2. Tap the network you wish to connect to.
Note: When you select an open network you are automatically
connected.
3. Enter a wireless password (if necessary).
4. Tap Connect.
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is active and there is an
available open wireless network.
Displays when Wi-Fi Direct is active and
configured for a direct connection to another
compatible device in the same direct
communication mode.
Displays when Wi-Fi Direct is active and
communicating
Displays when Wi-Fi is being used as a Mobile
HotSpot feature is active and communicating.
225