Samsung SM-G900AZKZAIO - Manual (Page 88)

80
Connect to a Wi-Fi Network
1. From any Home screen, tap ➔ Settings ➔
Wi-Fi.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
2. Tap the network you want to connect to.
Note: When you select an open network, you will be
automatically connected to the network.
3. Enter a wireless password if necessary.
Manually add your new network connection
1. From any Home screen, tap ➔ Settings ➔
Wi-Fi.
2. Tap Add Wi-Fi network.
3. Enter the Network SSID. This is the name of your
Wireless Access Point.
4. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
5. If secured, you will also need to enter your WAP’s
password.
6. Tap Show advanced options, if you need to add
advanced options such as Proxy settings and IP
settings.
7. Tap Connect to store the new information and connect
to your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From any Home screen, tap ➔ Settings ➔
Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF .
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.