Samsung SM-G900AZKZAIO - Manual (Page 112)

104
3. Tap S Beam and make sure the feature is turned on.
4. If not already active, in a single motion touch and slide
the S Beam slider to the right to turn it on .
5. On the source device (containing the desired image or
video), tap ➔ Gallery .
6. Locate and tap the selected image to open it in the
preview window.
Important! Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
7. Place the two active NFC enabled devices back to back
to begin.
8. From the Touch to beam screen, tap the reduced image
preview to begin the transfer.
Touch to beam
Place devices back to back
Tap the source image