Triton TritonNav User Manual
Page 75
2004.06.28
CHAPTER 1: Using DelphNav™ (Survey Control Panel)
69
Using Delph Nav
An Example of Survey Planning in DelphNav
FIGURE 44.
Channel being defined (with two dialog boxes overlaid)
5.
Enter some appropriate values for the number of cross sections and distance between
cross sections and click
Finish
.
At this time the cross sections are drawn on the chart and then the Channel Bathymetry
dialog box opens. The first cross section is identified by a tab numbered
0
.
6.
Use the numbered tabs at the lower edge of the dialog box to select the section you
wish to work on; then enter the values in the offset and depth boxes. Figure 18 on
page 33 shows a graphical cross section of such a line so defined.