Triton TritonNav - Manual (Page 34)

Making or Using a Survey Plan Using Delph Nav
28 CHAPTER 1: Using DelphNav™ (Survey Control Panel) 2004.06.28
FIGURE 15. Channel design procedure dialog box
2. For the border currently being defined, click one of the three available buttons: Draw
lines (left icon), Waypoint profile editor (middle icon), or the Open icon (right icon).
• If you chose
Draw lines , you can proceed to draw lines as previously explained in
‘Drawing Lines Independently of Each Other’ starting on page 16.
• If you chose
Waypoint profile editor , you define your channel lines in terms of
Northings and Eastings (or latitude and longitude). This procedure is identical to
the one explained in ‘Creating An Object Manually’ starting on page 20.
• If you chose
Open , you can import an existing ASCII file containing appropriate
coordinate data representing a line (at least two pairs coordinates) that you wish to
place in your current imagery. This procedure is identical to importing an ASCII
file, explained in ‘Importing Objects From an ASCII File’ starting on page 22.
3. If this is the first border being defined, repeat step #2 to define the second border.
If this is the second border being defined, the system makes available the text boxes in
the
Cross sections portion of the dialog box (initially these text boxes were grayed
out).