HP Insight Cluster Management Utility - Manual (Page 204)

cmu_mod_node(8)
NAME
cmu_mod_node -- Modify node(s) in the HP Insight CMU database.
SYNOPSIS
# /opt/cmu/bin/cmu_mod_node <-h | -s | -i | -f filename>
# /opt/cmu/bin/cmu_mod_node -H|--hostname hostname [-I|--ip ipaddress]
[-M|--mask netmask] [-A|--mac macaddress] [-L|--lg logicalgroup] [-G|--mgt-ip
mgtcardip
] [-P|--platform platform] [-R|--arch architecture] [-e|--serial-port
serial_port ] [-E|--serial-port-speed serial_port_speed] [-V|--vendor-args
vendor_args ] [-D|--cloning-block-device cloning_block_device]
[-C|--cartridge num] [-N|--node-number num]
DESCRIPTION
Modify one or more nodes in the HP Insight CMU database. A node can be modified interactively
uisng the –i option or from the command line. Multiple nodes can be modified using the –f
filename
option.
OPTIONS
-h|--help
show help
-s|--help-file-syntax
show help for file syntax
-i|--interactive
specify node information interactively
-f|--filename
modify node(s) using an input file
-H|--hostname hostname
compute node host name
-I|--ip ipaddress
compute node IP address
-M|--mask netmask
compute node netmask
-A|--mac macaddress
MAC address of the NIC attached to the management node network. (Use "-" to separate hex
values.)
-L|--lg logicalgroup
place the node in logical group indicated
-G|--mgt-ip mgtcardip
management card IP address
-P|--platform platform
node platform type (e.g. "generic")
-R|--arch architecture
node architecture (e.g. "x86_64")
-e|--serial-port serial_port
node serial port
204