HP Insight Cluster Management Utility - Manual (Page 17)

1. Access the iLO card.
2. Create the username and password. Each server must have the same username and password.
3. Select the Power Management tab.
4. For Automatically Power On Server, select No.
5. Select Submit.
Figure 2 iLO server power controls
2.1.8.2 DL160 G5, DL165c G5, DL165c G6, and DL180 G5 Servers
•
IDE
ATA/IDE Enhanced ◦
◦ Configure SATA as IDE
IMPORTANT: The embedded SATA Raid Controller option is not supported. Do not
select this option.
NOTE: These IDE settings only apply to the DL160 G5 Server.
•
IPMI
Serial Port assigned to System ◦
◦ Serial Port Switching Disabled
◦ Serial Port Connection Mode Direct
•
LAN
Share NIC mode Disabled ◦
◦ DHCP Disabled
•
Remote Access
Remote access Enabled ◦
◦ Redirection Always
2.1 Installing HP Insight CMU 17