HP Insight Cluster Management Utility - Manual (Page 18)

◦ Terminal VT100
•
Boot Configuration
Boot Order ◦
1. Embedded NIC
2. Disk or smart array
◦ Embedded NIC1 Enabled
2.1.8.3 DL160 G6 Servers
•
IPMI
Serial Port assigned to System ◦
◦ Serial Port Connection Mode Direct
•
PCI
NIC1 control Enabled ◦
◦ NIC1 PXE Enabled
•
SATA
SATA#1 Controller Mode AHCI ◦
•
Boot Configuration
Boot Order
◦
1. NIC
2. CD
3. Disk
2.1.8.4 SL2x170z G6 and DL170h G6 Servers BIOS setting
IMPORTANT: To enable BIOS updates, you must restart the server. You can restart the server
with Ctrl+Alt+Delete immediately after leaving the BIOS, or you can physically restart the server
by using the power switch on the server.
Figure 3 NIC2 on the SL2x170z G6 Server
•
BIOS settings
Post speedup Enabled ◦
18 Installing and upgrading HP Insight CMU