HP StorageWorks XP Remote Web Console Software - Manual (Page 160)

Figure 66 Pair Status Panel
The Detailed Information window displays the following:
• Status: Indicates the status of the pair. If the pair is split (or suspended), Status also displays the
suspend type. If the pair is waiting for initial copy, Status also displays the word (Queuing).
• Sync.: If the volume in the local storage system is a primary data volume, Sync. displays progress
of an initial copy operation.
If the volume in the local storage system is a secondary data volume, Sync. displays information
in the following ways:
• If the volume pair is not split, Sync. displays nothing.
• If the volume pair is split and therefore is in Suspend status, Sync. usually displays
synchronization rate (i.e., concordance rate) between the secondary data volume before
it became split and the secondary data volume after it became split. For example, the
synchronization rate (i.e., concordance rate) is 100 percent if the contents of the secondary
data volume are the same before and after the volume pair became split. Caution: If
a failure in the initial copy operation causes the volume pair to be split, Sync. displays
nothing. If a failure occurs in the initial copy operation, the Detailed Information window
( Figure 66 on page 160) displays the phrase "Initial copy failed."
• In the following cases, this column will be blank.
When the volume in the local storage system is neither a primary data volume nor a secondary
data volume.
When the status of the volume pair is Hold or Hlde.
• P-VOL (LDKC:CU:LDEV): Indicates the primary data volume.
The first line displays the LDKC number, the CU number and the LDEV number of the primary data
volume. If the primary data volume exists in the local storage system, the first line also displays
the CLPR number and the CLPR name.
The second line displays the device emulation type.
160 Performing URz Pair Operations