HP StorageWorks XP Remote Web Console Software - Manual (Page 148)

Figure 61 Pair Operation Window
The Pair Operation window displays the following:
• Tree: Lists LDKCs and lists CU images under the LDKC in the local storage system ( ).
If you select a CU image, the list displays volumes for the CU image. You can select only one CU
image at one time and cannot select two or more simultaneously.
• Upper-right buttons: The following buttons appear at the upper-right corner of the window:
• Display Filter: Displays the Display Filter window (see
Figure 63 on page 153).
This window allows you to narrow information in the list, so that the list displays
only the volumes that satisfy certain conditions. For detailed information, see
“ Filtering Information in the List in the Pair Operation Window ” on page 152.
• Export: Saves information about volume pairs in a text file. For detailed information, see
“ Saving Pair Status Information into a Text File ” on page 154.
• Previous: The list can display up to 1,024 volume pairs simultaneously. If the number of volume
pairs exceeds 1,024, you can use the Previous and Next buttons to display the remaining
volume pairs in the list. The Previous button displays the previous 1,024 volume pairs in the list.
• Next: The list can display up to 1,024 volume pairs simultaneously. If the number of volume
pairs exceeds 1,024, you can use the Previous and Next buttons to display the remaining
volume pairs in the list. The Next button displays the next 1,024 volume pairs in the list.
• List: Displays volumes in the local storage system. One row represents one volume.
By default, information in the list is arranged in order of port numbers. For volumes with more than
one path, each path is displayed in a separate row.
The maximum number of rows in the list is 1,024. If the number of volumes exceeds the number of
rows, you can use the Previous and Next buttons to view information about volumes that do not
appear in the list currently.
148 Performing URz Pair Operations