HP StorageWorks XP Remote Web Console Software - Manual (Page 109)

• detailed information about remote storage systems
• detailed information about logical paths
• detailed information about ports on the local storage system
• Preview: Displays changes that have been made in the window. When you change settings in
the window, the changes will be displayed in the Preview list before the changes are applied
to storage systems. If you are sure that information in the Preview is correct, select the Apply
button to apply the settings that you have made.
• Operation: Indicates the operation in progress in the DKC Operation window.
• Apply: Applies settings in the Preview box to the storage systems.
• Cancel: Cancels the settings displayed in the Preview box.
The information on the DKC Operation window will be updated when you do one of the following:
1. Select another tab and then reselect the DKC Operation tab.
2. Click File, Refresh on the menu bar of the XP Remote Web Console main window.
3. Select the Apply button.
4. Select modify mode when you are in view mode.
5. Close the DKC Status window.
Displaying Information about Remote Storage Systems
To display information about remote storage systems:
1. Display the DKC Operation window.
2. In the Display box, select DKC.
The tree and the list display remote storage systems.
Figure 47 Remote Storage System Information in the DKC Operation Window
• Tree: Lists the remote storage systems at each of the LDKCs of the local storage systems. The
following information appears to the right of the icon of the remote storage system:
• controller ID of a remote storage system (The model name of the remote storage system)
• serial number of the remote storage system
• path group ID
The LDKC#01 cannot be used in this version.
The icon of the remote storage system indicates the status of logical paths between the local storage
system and the remote storage system:
All the logical paths are in normal status.
A failure occurs to some of the logical paths.
• List: Displays information about remote storage systems:
• Controller ID displays the controller ID and the model name of the storage system of a remote
storage system. The controller ID is a storage system family ID of a storage system. The
icon indicates the status of logical paths between the local storage system and the remote
storage system:
All the logical paths are in normal status.
A failure occurs to some of the logical paths.
Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200 109