HP StorageWorks XP Remote Web Console Software - Manual (Page 108)

• If Universal Replicator for Mainframe has not been started:
1. Use your Web browser to display the storage device list. In the storage device list, select the
storage system to log in. Enter a user name and the password, and then click OK.
The XP Remote Web Console main window is displayed.
2. Click Go, Universal Replicator for Mainframe and then DKC Operation on the menu bar of
the XP Remote Web Console main window.
• If Universal Replicator for Mainframe has already been started:
1. Select the DKC Operation tab.
The Disk Controller (DKC) Operation window is displayed.
NOTE:
The DKC controls an entire storage system. URz windows use the word "DKC" to indicate a storage
system. The Logical Disk Controller (LDKC), may also be called logical DKC. LDKC is a controller that
controls the logical storage system that exists in XP disk array. The term LDKC indicates logical storage
system in the Universal Replicator for Mainframe window.
Figure 46 DKC Operation Window
The DKC Operation window displays the following:
• Display: Changes information in the DKC Operation window.
If you select DKC, the DKC Operation window displays information about the remote storage systems
and the logical paths.
If you select Port, the DKC Operation window displays information about ports on the local storage
system.
• Tree: Lists either of the following:
• remote storage systems
• channel adapters on the local storage system and port attributes
• List: Displays one of the following:
108 Configuring Disk Storage Systems and Logical Paths