HP StorageWorks XP Remote Web Console Software - Manual (Page 120)

• No.: displays serial numbers used for rows in the list
• Path Status: indicates status of a logical path (For details, see
Table 27 on page 121)
• Port: indicates a port on the local storage system
• Pair-Port: indicates a port on the remote storage system.
• S/N: indicates the serial number and LDKC number of the remote storage system.
• Controller ID: displays the controller ID (model name that indicates the model) of the remote
storage system.
• Path Gr. ID: indicates a path group ID.
• M-R Path: indicates the type of channel interface between the local and the remote storage
systems. This column displays fibre.
• Minimum Paths: Indicates the minimum possible number of paths between the local and the
remote storage systems.
• RIO MIH Time: indicates the RIO MIH timer value, which is the wait time until data transfer from
the local storage system to the remote storage system is complete.
• DKC Registered: Indicates the date and time when the local and the remote storage systems are
associated to each other.
• Last Updated: indicates the date and time when the last operation on a logical path to the
remote storage system was performed.
• Refresh the DKC Operation tab after this panel is closed: If you select this check box, information
in the DKC Operation window will be refreshed after you close the DKC Status window.
• Refresh: refreshes the information in the DKC Status window.
• Close: closes the DKC Status window.
120 Configuring Disk Storage Systems and Logical Paths