HP StorageWorks XP Remote Web Console Software - Manual (Page 121)

Table 27 Logical Path Status
Status Remarks
Normal This path has been successfully established and can be used for URz remote copy
activities.
Nothing An operation for configuring or deleting this logical path is in progress.
Initialization Failed An error occurred with initialization of connection between the local and the remote
storage system. The probable causes are:
No cable is connected to the local storage system.
No cable is connected to the remote storage system.
No cable is connected to the network device that comes between the local and the
remote storage system.
Communication Time
Out
This status indicates one of the following:
A timeout error has occurred between the primary and the secondary storage systems.
A logic error is detected between the primary and the secondary storage systems.
Resource Shortage
(Port)
The local storage system rejected the function for configuring logical path connection.
All logical path resources in the local storage system might be used for other
connections.
Resource Shortage
(Pair-Port)
The remote storage system rejected the function for configuring logical path
connection. All logical path resources in the remote storage system might be used for
other connections.
Serial Number
Mismatch
The serial number of the storage system connected to this logical path does not match
the serial number specified by the Add DKC window.
Invalid Port The port is not an initiator port.
Pair-Port Number
Mismatch
This status indicates one of the following:
The specified port number is incorrect.
The port in the remote storage system is physically disconnected from the local storage
system.
Pair-Port Type
Mismatch
The port on the remote storage system is not an RCU target port.
Communication
Failed
A communication timeout error has occurred on the path between the primary and
the secondary storage systems.
Removing the Relationship Between the Primary and the
Secondary Storage Systems
To remove the relationship between the primary and the secondary storage systems and then remove all
the logical paths between the two storage systems. both the primary storage system administrator and the
secondary storage system administrator must perform this operation:
1. Make sure that all affected URz volume pairs have been deleted.
2. Ensure that the XP Remote Web Console main window is in Modify mode.
3. For detailed information about how to do this, please refer to XP Remote Web Console User’s
Guide.
4. Ensure that the DKC Operation window is displayed.
5. In Display, select DKC.
6. Select LDKC from the tree.
7. The list displays a list of remote storage systems.
8. Select and right-click remote storage system(s) from the list.
9. Select DKC Operation and Delete DKC from the pop-up menu.
Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200 121