HP StorageWorks XP Remote Web Console Software - Manual (Page 65)

iSCSI folder
If you double-click the iSCSI folder, iSCSI ports in the array appear as icons. The port name and
attribute appear on the right of each icon.
NOTE:
•
The iSCSI folder does not appear if the array does not contain iSCSI channel adapters.
• iSCSI ports always have the Target attribute.
Figure 18 iSCSI folder
.
Table 8 iSCSI port icons
Status Icon
XP Secure Manager is not applied to the port.
XP Secure Manager is applied to the port
When you double-click an iSCSI port in the tree, a list of iSCSI targets ( ) appears. The iSCSI
target's group number (G-ID), name, and host mode appear on the right of this icon. For more
information about host modes, see
Table 15 .
When you double-click an iSCSI target in the tree, a list of host bus adapters ( ) appears. The host
bus adapter's nickname and iSCSI name appear on the right of this icon.
NOTE:
Host bus adapters are adapters contained in host computers and are used as ports for connecting
hosts and the array.
When you double-click a port to which XP Secure Manager is not applied to display a list of iSCSI
targets, iSCSI targets except for the first group (that is, iSCSI target 0) are grayed out.
XP LUN Configuration and Security Manager User Guide 65