HP StorageWorks XP Remote Web Console Software - Manual (Page 80)

NOTE:
The iSCSI folder appears only if the array contains an iSCSI channel adapter.
Figure 34 iSCSI folder
.
Table 14 iSCSI port and iSCSI target status icons
Status Icon
iSCSI port.
CLX-Y
iSCSI target performs authentication of hosts.
iSCSI name
iSCSI target does not perform authentication of hosts.
iSCSI name
Port Information list
• Port Name: Fibre Channel port name. For more information, see Table 2 , Table 3 , Table 4 , and
Table 5 .
• Time out: Period of time between authentication sessions to the same port. If the previous authen-
tication session to a port failed, the next authentication session starts after the specified period of
time elapses. The unit is seconds.
• Refusal Intvl.: If authentication fails for the number of times specified in Refusal Freq., connection
to the port fails. Refusal Intvl. is the interval from when connection to a port fails to when the next
authentication session starts. The unit is minutes.
• Refusal Freq.: Number of times of authentication for connecting to a port is allowed. If authentic-
ation fails for the specified number of times, connection to the port fails.
FC Switch Information list
• Port Name: Fibre Channel port name. For more information, see Table 2 , Table 3 , Table 4 , and
Table 5 .
• User Name: Fibre Channel switch's user name.
• Mode: Mode of authentication between ports and Fibre Channel switches. If the authentication
mode is mutual, bi-directional appears. If the authentication mode is not mutual, unidirectional
appears.
XP LUN Configuration and Security Manager Software panes 80