HP StorageWorks XP Remote Web Console Software - Manual (Page 141)

Changing a host's user information
You can change a host's registered user name or secret and switch authentication settings between
Enable and Disable after registration.
NOTE:
You cannot change iSCSI names when you change user information.
1. Start XP LUN Configuration and Security Manager Software, and display the Authentication pane
(
Figure 30 ).
2. In the Port tree, double-click the iSCSI folder, and select the port or iSCSI target on which the user
information you want to change is registered. All user information for hosts registered on the
selected port appears in the Authentication information (Host) list.
3. In the Authentication information (Host) list, right-click the user information item you want to
change, and select Change User Information (Host). The Change User Information (Host) pane
appears.
Figure 72 Change User Information (Host) pane
. 4. Change the host's user information.
You can change the specifications of User Name and Secret. For more information about available
characters and length in the user name or secret, see
Registering a host's user information on an
iSCSI target .
5. Click OK. The host's user information appears in blue in the Authentication information (Host)
list.
6. Click Apply. A confirmation message appears.
7. Click OK. Settings are applied to the array.
Deleting a host's user information (iSCSI environments)
1. Start XP LUN Configuration and Security Manager Software, and display the Authentication pane
(
Figure 30 ).
XP LUN Configuration and Security Manager User Guide 141