HP StorageWorks XP Remote Web Console Software - Manual (Page 89)

Do you need to turn on
or off the power supply
of the host? When to select this op-
tion Host mode option No.
No
When all the following
conditions are satisfied:
• Host mode 08 HP is
used
• You want to suppress
creation of device files
for devices to which
paths are not defined
No display for ghost LUN 12
No
When you want to be in-
formed by service inform-
ation message (SIM) that
the number of link failures
detected between ports
exceeds the threshold.
SIM report at link failure 13
No
When all the following
conditions are satisfied:
• Host mode 07 Tru64
is used
• You want to use TruC-
luster to set a cluster
to the Continuous Ac-
cess XP P-VOL and S-
VOL, respectively
HP TruCluster with Con-
tinuous Access XP function
14
No
When all the following
conditions are satisfied:
• The host mode 0F AIX
is used
• HACMP 5.1 Version
5.1.0.4 or later,
HACMP4.5 Version
4.5.0.13 or later, or
HACMP5.2 or later is
used
HACMP 15
No
When all the following
conditions are satisfied:
• The host mode 0F AIX
is used
• VERITAS Cluster Serv-
er is used
VERITAS Cluster Server 22
No
When you want to
shorten the recovery time
on the host side; if the
data transfer failed
REC Command Support 23
XP LUN Configuration and Security Manager User Guide 89