HP ProCurve 520wl Wireless Access Point User Manual
HP Routers
Table of contents
Document Outline
- Introducing the hp WL520
- Configuring the hp WL520
- In This Chapter
- Prerequisites
- ScanTool Program
- Set Basic Configuration Parameters
- Download the Latest Software
- Other Network Settings
- Change your Wireless Interface Settings
- Ethernet Settings
- Configure your Management Interfaces
- Other Security Configuration Settings
- If You Encounter Problems...
- Managing the hp WL520
- Configuring Advanced Features
- In This Chapter
- Network Settings
- VLAN Support
- Management Settings
- Setting Filters
- Alarms (SNMP Traps)
- Bridge Configuration Settings
- Wireless Distribution System (WDS)
- Advanced RADIUS Features
- Troubleshooting
- In This Chapter
- Troubleshooting Concepts
- Symptoms and Solutions
- Recovery Procedures
- System Alarms (Traps)
- Related Applications
- LED Indicators
- Using the Command Line Interface
- In This Chapter
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables & User Strings
- Configuring the WL520 Unit using CLI commands
- Set Basic Configuration Parameters using CLI Commands
- Other Network Settings
- Configure your WL520 device as a DHCP Server
- Maintain 802.11b Client Connections using Link Integrity
- Disable VLAN Management
- Change your Wireless Interface Settings
- Enable/Disable Closed System
- Enable/Disable Load Balancing
- Enable/Disable Medium Density Distribution
- Autochannel Select (ACS)
- Set the Distance Between APs
- Set the Multicast Rate
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure MAC Access Control
- Set RADIUS Parameters
- Parameter Tables
- Recording Your Configuration Settings
- Specifications