Radius dns host name support, Using dns host names, Radius dns host name support -25 – HP ProCurve 520wl Wireless Access Point User Manual

Page 74: Using dns host names -25

Advanced RADIUS Features

4-25

radius dns host name support

DNS Names are familiar names used to identify network hosts instead of IP addresses. For your convenience, the WL520 can

be configured as a DNS client to recognize the DNS host name of your RADIUS server (so you can specify a RADIUS Server’s

name rather than its IP address in the RADIUS server configuration screens).

Figure 4-26

Figure 4-26 IP Configuration Screen - Configuring the WL520 as a DNS Client

IP Configuration Screen - Configuring the WL520 as a DNS Client

using dns host names

1. In the Web Interface, click the

Configure

button and select the

Network

tab.

2. Select the

IP Configuration

sub-tab.

3. Once you have configured the IP information for your WL520, select the check box to

Enable DNS Client

4. In the

DNS Primary Server IP Address

field, enter the IP Address of the Primary DNS server which will resolve the RADIUS

Server Host name to an IP address.

5. In the

DNS Secondary Server IP Address

field, enter the IP Address of the Secondary DNS server which will resolve the

RADIUS Server Host name to an IP address, if applicable.

6. Enter the DNS host name, also called the

DNS Client Default Domain Name

7. Select

to save your changes and reboot the WL520.