Set system name, location and contact information, Set a static ip address for the wl520 device – HP ProCurve 520wl Wireless Access Point User Manual
Page 18
set system name, location and contact information
set system name, location and contact information
set system name, location and contact information
Figure 2-5
Figure 2-5
Figure 2-5
tem Configurat n
System Configuration
System Configuration
Configure
Configure
Configure
System
System
System
OK
OK
OK
set a static ip address for the wl520 device
set a static ip address for the wl520 device
set a static ip address for the wl520 device
Figure 2-6
Figure 2-6
Figure 2-6
N work IP Configuration
Network IP Configuration
Network IP Configuration
set system name, location and contact information
Figure 2-5
System Configuration
Sys
io
1. In the Web Interface, click the
Configure
button and select the
System
tab.
2. Enter the name of the WL520 device, its location within your network or its physical location, such as “Front Lobby” or
Engineering, and the name, phone number and e-mail address of the person responsible for this device.
3. Click
OK
.
set a static ip address for the wl520 device
Figure 2-6
Network IP Configuration
et
2-5