HP ProCurve 520wl Wireless Access Point User Manual

Page 35

Other Security Configuration Settings

2-22

Figure 2-21

Figure 2-21 Security Configuration Screen - RADIUS Authentication

Security Configuration Screen - RADIUS Authentication

–

Enable RADIUS MAC Access Control

. Click inside the check box to provide authentication by the RADIUS server. Deselect

the check box to prevent use of the RADIUS server.

–––– Enable the Primary or Backup RADIUS Server

Enable the Primary or Backup RADIUS Server

. Click in the desired check box to enable the RADIUS Server. You must specify

information for at least the Primary RADIUS server. The Backup RADIUS server is optional.

–

Authorization Lifetime (seconds)

. Enter the time, in seconds, each client session may be active before being automatically re-

authenticated. Range is 60 - 43200 seconds (in 60 sec increments); default is 900 sec.

–

MAC Address Format Type.

Enter the format in which the 12-digit MAC addresses are listed within the RADIUS server.

Options include dash delimited (dash between each pair of digits: xx-yy-zz-aa-bb-cc), colon delimited (colon between

each pair of digits: xx:yy:zz:aa:bb:cc), single dash delimited (dash between the sixth and seventh digits: xxyyzz-aabbcc),

and no delimiters between pairs of hexadecimal digits (xxyyzzaabbcc).

–

Server Addressing Format.

Server Addressing Format. Select either server name or IP address.

Select either server name or IP address.

Use a server name only if you have enabled the DNS

Client functionality. See

–

Server Name/IP Address

. Enter the server’s IP address or name (depending on the Server Addressing Format setting) in the

field provided.

–

Destination Port

. Enter the RADIUS Authentication port. The default value is 1812.

–

Shared Secret

. The password for the user on the RADIUS Server must be the same as the Shared Secret.

–

Response time (seconds)

. Enter the maximum time, in seconds, to wait for RADIUS to respond with authentication status.

–

Maximum Retransmissions

. Enter the maximum number of times an authentication may be retransmitted.