Done, exit, quit, Download, Done, exit, quit -6 download -6 – HP ProCurve 520wl Wireless Access Point User Manual

Page 89

CLI Command Types

6-6

example 4. display prompts for successive parameters

Enter the command, a space, and then "?". Then, when the parameter prompt appears, enter the parameter value. Result: The

parameter is changed and a new CLI line is echoed with the new value (in the first part of the following example, the value is

the IP Address of the TFTP server).
After entering one parameter, you may add another "?" to the new CLI line see the next parameter prompt, and so on until

you enter all parameters. The following example shows how this is used for the "download" Command. The last part of the

example shows the completed download Command ready for execution.

[Device Name]>

download ?

[Device Name]>

download 10.0.0.2 ?

[Device Name]>

download 10.0.0.2 apimage ?

[Device Name]>

download 10.0.0.2 apimage bin

done, exit, quit

Each command disconnects the CLI Session.

[Device Name]>

done

[Device Name]>

exit

[Device Name]>

quit

download

Downloads the specified file from TFTP server to the Access Point. Executing 'download' in combination with the asterisks

character, “*”, will make use of the previously set TFTP parameters. Executing download without parameters will display

command help and usage information.
1. Syntax to download a file:

Device Name]>

download

Example:
[Device Name]>

download 192.168.1.100 APImage2 bin

2. Syntax to display help and usage information:

[Device Name]>

download

3. Syntax to execute the download Command using previously set (stored) TFTP Parameters:

[Device Name]>download *