HP ProCurve 520wl Wireless Access Point - Manual (Page 138)

Configuration Settings
7-16
Table 7-3 Table 7-3 Table 7-3 Table 7-3 Bridge Parameters - Spanning Tree - Priority Path and Cost Table Bridge Parameters - Spanning Tree - Priority Path and Cost Table Bridge Parameters - Spanning Tree - Priority Path and Cost Table Bridge Parameters - Spanning Tree - Priority Path and Cost Table
Use the following commands to enter information into the Priority Path and Cost Table:
> set stptbl priority <0 - 255>
> set stptbl pathcost <1 - 65535>
> set stptbl status
Once you have entered information into the Priority Path and Cost Table, view the table to confirm your changes using the
show stptbl
command.
port port port port priority priority priority priority path cost path cost path cost path cost status status status status
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15