HP ProCurve 520wl Wireless Access Point - Manual (Page 64)

Alarms (SNMP Traps)
4-15
syslog syslog syslog syslog
The Syslog messaging system enables the WL520 to transmit event messages to a central server for monitoring and
troubleshooting. The access point logs “Session Start (Log-in)” and “Session Stop (Log-out)” events for each wireless client as
an alternative to RADIUS accounting.
See RFCs 3164 at
http://www.rfc-editor.org/ for more information on the Syslog standard.
Figure 4-15 Figure 4-15 Figure 4-15 Figure 4-15 Syslog Interaction with the hp wireless enterprise access point WL520 Syslog Interaction with the hp wireless enterprise access point WL520 Syslog Interaction with the hp wireless enterprise access point WL520 Syslog Interaction with the hp wireless enterprise access point WL520
setting syslog event notifications setting syslog event notifications setting syslog event notifications setting syslog event notifications
Syslog Events are logged according to the level of detail specified by the administrator. Logging only urgent system messages
will create a far smaller, more easily read log then a log of every event the system encounters. Determine which events to log
by selecting a priority defined by the following scale:
event event event event priority priority priority priority description description description description
enabling syslog event notifications enabling syslog event notifications enabling syslog event notifications enabling syslog event notifications
Figure 4-16 Figure 4-16 Figure 4-16 Figure 4-16 Syslog Configuration Screen Syslog Configuration Screen Syslog Configuration Screen Syslog Configuration Screen
LOG_EMERG 0 system is unusable
LOG_ALERT 1 action must be taken immediately
LOG_CRIT 2 critical conditions
LOG_ERR 3 error conditions
LOG_WARNING 4 warning conditions
LOG_NOTICE 5 normal but significant condition
LOG_INFO 6 informational
LOG_DEBUG 7 debug-level messages