Issuing system commands, Download, Issuing system commands -9 – HP ProCurve 520wl Wireless Access Point User Manual

Page 47: Download -9

Issuing System Commands

3-9

issuing system commands

To issue commands, click on the

Commands

operation button. Result: The

Commands

screen appears. Each tab allows a

specific operation.

Figure 3-12

Figure 3-12 System Commands Screen

System Commands Screen

download

Figure 3-13

Figure 3-13 Commands Screen - Download

Commands Screen - Download

Use the

Download

tab to download Configuration, AP Image, and Bootloader files to the WL520. A TFTP server must be

running and configured to point to the directory containing the file.
If you don’t have a TFTP server installed on your system, install the TFTP server from the CD. Select the “Xtras/SolarWinds”

sub-directory, double-click “OEM-TFTP-Server.exe”, and follow the directions given to complete the installation.
The

Download

tab shows version information and allows you to enter TFTP information as described below.

–

Server IP Address

. Enter the TFTP server IP Address.

Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server. Note: This is the

IP address that will be used to point the Access Point to the AP Image file.

–

File Name

. Enter the name of the file to be downloaded.

Copy the updated AP Image file to the shared TFTP server folder. The default AP Image is located at C:/Program Files/

WL520_AP/AP/.

–

File Type

. Select the proper file type. Choices include:

–

Config

for configuration information, such as System Name, Contact Name, and so on.

–

Img

for the AP Image (executable program).

–

BspBl

for the Bootloader software.

–

File Operation

. Select either

Download

, or

Download & Reboot

. You should reboot the WL520 after downloading files.