HP ProCurve 520wl Wireless Access Point - Manual (Page 46)

Monitoring Network Statistics
3-8
monitoring remote link test statistics monitoring remote link test statistics monitoring remote link test statistics monitoring remote link test statistics
This tab displays information on the quality of the wireless link to clients and other WL520 units in the Wireless Distribution
System.
NOTE:
The Remote Link Test feature is only available for 2.4 GHz (802.11b) clients.
Figure 3-10 Figure 3-10 Figure 3-10 Figure 3-10 Link Test Screen Link Test Screen Link Test Screen Link Test Screen
To find wireless clients connected to the WL520 device, click Explore Explore Explore Explore , then the Refresh Refresh Refresh Refresh button. To test the link quality, select a
station, and then click Link Test Link Test Link Test Link Test . Quality is measured in terms of Signal strength, Noise strength, and the Signal to Noise Ratio
(SNR).
Figure 3-11 Figure 3-11 Figure 3-11 Figure 3-11 SNR Report Screen SNR Report Screen SNR Report Screen SNR Report Screen