HP ProCurve 520wl Wireless Access Point - Manual (Page 111)

Parameter Tables
6-28
NOTE:
For 802.11a cards in Europe, Auto Channel Select is a read-only parameter; it is always enabled.
wireless distribution system (wds) parameters wireless distribution system (wds) parameters wireless distribution system (wds) parameters wireless distribution system (wds) parameters
NOTE:
These parameters only apply to 802.11b radios.
security parameters security parameters security parameters security parameters
RTS/CTS Medium Reservation Integer 0 – 2347
Default is 2347 (off)
RW medres
MAC Address PhyAddress 12 hex digits R macaddr
Turbo Mode
(not available in all countries)
Integer enable
disable (default)
RW turbo
Supported Data Rates Octet String See “Transmit Rate” R suppdatarates
Transmit Rate Integer32 Reported in 500 Kb/sec
intervals:
0 - Auto Fallback (default)
12 (6 Mbit/sec)
18 (9 Mbits/sec)
24 (12 Mbits/sec)
36 (18 Mbits/sec)
48 (24 Mbits/sec)
72 (36 Mbits/sec)
96 (48 Mbits/sec)
108 (54 Mbits/sec)
For Turbo mode (not
available in all countries):
0 - Auto Fallback (default)
24 (12 Mbit/sec)
38 (18 Mbits/sec)
48 (24 Mbits/sec)
72 (36 Mbits/sec)
96 (48 Mbits/sec)
144 (72 Mbits/sec)
192 (96 Mbits/sec)
216 (108 Mbits/sec)
RW txrate
Supported Frequency Channels Octet String See Operating Frequency
Channel
R suppchannels
Physical Layer Type Integer ofdm (orthogonal frequency
division multiplexing) for
802.11a
R phytype
Regulatory Domain List DisplayString USA (FCC)
Canada (DOC)
Europe (ETSI)
Spain (SP)
France (FR)
Japan (MKK)
R regdomain
name name name name type type type type values values values values access access access access cli parameter cli parameter cli parameter cli parameter
WDS Table Table N/A R wdstbl
Port Index Integer 3.1 - 3.6 (Wireless A)
4.1 - 4.6 (Wireless B) R portindex
Status Integer enable (1)
disable (2) (default)
RW status
Partner MAC Address PhysAddress User Defined RW partnermacaddr
name name name name type type type type values values values values access access access access cli parameter cli parameter cli parameter cli parameter
Security Group N/A R security
Configuration Mode Integer none
802.1x
mixed
RW secconfig
Re-keying Interval Integer 60 – 65535 seconds
default is 900 sec RW secrekeyint
name name name name type type type type values values values values access access access access cli parameter cli parameter cli parameter cli parameter