HP XP Continuous Access Software User Manual
Page 177

Table 41 Config. def. file settings (HORCM_INST) & specif. vals. in NAS Blade system
Specified values in NAS Blade system
Item
Section name
Fixed IP address of eth1 or eth2 in the
NAS package in XP Continuous Access
Journal's secondary site
(But if you specify
eth1
in
HORCM_MON
ip_address
, specify
eth1
. If you
specify
eth2
in
HORCM_MON
ip_address
, specify
eth2
.)
ip_address
HORCM_INST
20331 (instance number 16) or 20332
(instance number 17)
service
NOTE:
You can specify the host name instead of the fixed IP address if the fixed IP address and
the corresponding host name are registered in
/etc/hosts
, an NIS server, or a DNS server.
See the NAS Blade Manager User's Guide for information about registering the fixed IP address
and the corresponding host name in
/etc/hosts
and how the NAS Blade system can search
the host name using NIS or DNS.
Table 42 Example 3: XP RAID Manager configuration definition file (for instance number 16)
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
123.456.78.51 20331 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
#UnitID 0 (Serial# 62486)
/dev/sdf
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
# /dev/sdt SER = 62486 LDEV = 10 [ FIBRE FCTBL = 3 ]
VG VG_010 CL1-A-1 0 10
# /dev/sdu SER = 62486 LDEV = 64 [ FIBRE FCTBL = 3 ]
VG VG_011 CL1-A-1 0 11
# /dev/sdv SER = 62486 LDEV = 12 [ FIBRE FCTBL = 3 ]
VG VG_012 CL1-A-1 0 12
# /dev/sdw SER = 62486 LDEV = 66 [ FIBRE FCTBL = 3 ]
VG VG_013 CL1-A-1 0 13
HORCM_INST
#dev_group ip_address service
VG 123.456.80.51 20331
VG 123.456.80.115 20331
Checking the contents of the XP RAID Manager configuration definition file
By combining the following commands, you can check whether an appropriate LU is specified in
the
HORCM_DEV
section in the XP RAID Manager configuration definition file.
First, start XP RAID Manager in both the NAS package in which the XP Continuous Access Journal
P-VOL is connected and in the NAS package that uses the S-VOL (see
).
Preparing for XP Continuous Access Journal operations 177