HP XP Continuous Access Software User Manual
Page 188
pairvolchk: Volstat is P-VOL.[status = COPY] => Deleting
pairvolchk: Volstat is P-VOL.[status = SMPL] => Deleted
3.
At the primary and secondary sites, stop XP RAID Manager.
sudo horcmshutdown.sh
(1-instance configuration)
sudo horcmshutdown.sh 16 17
(2-instance configuration)
NOTE:
If you start the split pair operation with offline backup, but have not yet connected the
target file system to the NAS package at the secondary site, finish connecting the target file system
to the NAS Package, and then start the previously described operations. If you start the split pair
operation with online backup, but do not connect the target file system to the NAS package at the
secondary site, finish connecting the target file system to the NAS Package, and then start the
previously described operations (see
Splitting XP Continuous Access Journal volume pairs
).
To delete the XP Continuous Access Journal volume pair in PSUS status without using the S-VOL
file system:
1.
At the secondary site, terminate the program that accesses the S-VOL.
2.
At the secondary site, delete CIFS/NFS shares using the
enas_nfsdelete
and
enas_cifsdelete
commands, and unmount S-VOL using the
enas_fsumount
command.
NOTE:
When the S-VOL is the file system managed by NAS Sync Image, delete the CIFS/NFS
shares under the differential-data snapshots using the
enas_nfsdelete
and
enas_cifsdelete
commands, unmount the differential-data snapshots using the
syncumount
command, and release the differential-data storage devices using the
syncstop
command.
3.
At the secondary site, delete the S-VOL file system using the
enas_fsdelete
command.
4.
At the primary site, delete the XP Continuous Access Journal volume pair.
sudo pairsplit {-g
group-name
|-d
volume-name
} -S
5.
At the primary site, verify that the XP Continuous Access Journal volume pair has been deleted.
sudo pairvolchk {-g
group-name
|-d
volume-name
}
pairvolchk: Volstat is P-VOL.[status = COPY] => Deleting
pairvolchk: Volstat is P-VOL.[status = SMPL] => Deleted
6.
At the primary site and the secondary site, stop XP RAID Manager.
sudo horcmshutdown.sh
(1-instance configuration)
sudo horcmshutdown.sh 16 17
(2-instance configuration)
NOTE:
If you start the split pair operation with offline backup, but you have not yet connected
the target file system to the NAS package at the secondary site, finish connecting the target file
system to the NAS package, and then start the previously described operations. If you start the
split pair operation with online backup, but you have not yet connected the target file system to
the NAS package at the secondary site, finish connecting the target file system to the NAS package,
and then start the previously described operations (see
Splitting XP Continuous Access Journal
).
To delete the XP Continuous Access Journal volume pair in a status other than PSUS status:
1.
At the primary site, delete the XP Continuous Access Journal volume pair.
sudo pairsplit {-g group name|-d volume name} -S
2.
At the primary site, verify that the XP Continuous Access Journal volume pair has been deleted.
sudo pairvolchk {-g group name|-d volume name}
188 XP Continuous Access Journal operations with NAS Blade