12 troubleshooting, General troubleshooting – HP XP Continuous Access Software User Manual

Page 194

12 Troubleshooting

General troubleshooting

You are responsible for the operation and normal maintenance of the XP Command View Advanced
Edition Software management station. For troubleshooting information on XP Command View
Advanced Edition Software, see the Troubleshooting chapter of the HP StorageWorks XP Command
View user guide for XP Disk Arrays.

The following are guidelines for troubleshooting the XP Command View Advanced Edition Software
management station:

•

Check the cabling and the LAN. Verify that both the computer and LAN cabling are firmly
attached.

•

Reboot the management station. Close any programs that are not responding. If necessary,
reboot the management station and restart XP Command View Advanced Edition Software.

•

Check error codes.

•

Check the status lamp on the XP Command View Advanced Edition Software main pane. If
the color of the lamp is yellow or red, check the status of the array on the Status pane (see
the

•

Download the XP Command View Advanced Edition Software trace files using the FD Dump
Tool. If you are unable to resolve an error condition, copy the XP Command View Advanced
Edition Software configuration information onto floppy disks using the FD Dump Tool. Contact
your HP account support representative (see

Calling HP

), and give the information on the

floppy disks to your HP account support representative.

Troubleshooting XP Continuous Access Journal operations

Table 53 (page 195)

provides general troubleshooting information for XP Continuous Access Journal.

Table 54 (page 196)

provides troubleshooting information for logical paths between arrays.

Table 55 (page 198)

and

Table 56 (page 200)

provide troubleshooting information for suspended