HP XP Continuous Access Software - Manual (Page 199)

Table 55 Troubleshooting suspended XP Continuous Access Journal pairs (continued)
Corrective action Description Applies to Suspend type
Delete the pair from the
primary array. Clear all
error conditions at the
primary array, primary data
volume, secondary array,
and secondary data volume.
Restart the initial copy
operation using the
Paircreate pane. Primary array suspended this
pair during the initial copy
operation. Data on the
secondary data volume is
not identical to data on the
primary data volume. Primary data volume,
secondary data volume PSUE, Initial Copy Failed
None. Primary array
automatically restores these
XP Continuous Access
Journal pairs when the
primary array is powered
on. Primary array suspended all
XP Continuous Access
Journal pairs because the
primary array was powered
off. Secondary data volume PSUE, MCU P/S-OFF
Table 56 (page 200) provides troubleshooting instructions for XP Continuous Access Journal pair
suspension. Hardware failures affecting cache memory and shared memory of the primary or
secondary array might also cause XP Continuous Access Journal pairs to be suspended.
Troubleshooting XP Continuous Access Journal operations 199